|
DESCRIPTION:
A New Generation of Motorcycle Security featuring the Latest Technologies.
Based on the highly successful M1, The Ignitor® M2 Motorcycle Alarm System vastly extends the feature set of the original design with SMS Alerts and Status Reports sent direct to your mobile phone, anywhere in the world! Status reports include location, battery volts and more.
The Ignitor® M2 utilises the very latest 16-bit Triple Axis Digital Accelerometers (translation: extremely accurate at detecting bike motion in any direction).
The Embedded Flash Microcontroller boasts nanoWatt® XLP Technology, on-board EEPROM, Serial communications and ADCs. (translation: monitors your battery, remembers stuff you tell it and calls your mobile phone when in distress).
Just like the M1, the Ignitor® M2 Arms & Disarms with your existing ignition key (or mobile) and boasts a low impact installation.
The M2 is fully encased in a durable, single compact unit (62 x 86 x 56mm) & they're still designed & manufactured right here in Sydney, Australia.
Find a local Stockist
OPERATION
Functionality is similar to that of the M1, with the addition of SMS control and monitoring.
- To Arm, simply switch the ignition off. A 30 second snub period allows time for the rider to dismount the bike and remove the ignition key.
- To Disarm, switch the ignition off twice. A short chirp acknowledges the disarmed state. In this mode, the Ignitor® M2 is still powered, but disabled. The disarmed state is useful for refueling, maintenance or simply taking in the view.
- Use your mobile phone to SMS (Text) the desired operating mode. The Ignitor® M2 provides 3 operating modes; Armed, Disarmed & Silent. In silent mode, the alarm is armed, but not 'sounded’. Only SMS alerts are sent.
- Warning Chirps sound on initial detection of movement. A few short chirps followed by an 8 second snub period allows would be thieves to move away from the bike and find another target.
- Receive Text Alerts (SMS) within moments of any warning chirp or low battery event. Note: text alerts are 'mobile network' dependant. Both you and your bike must be within the GSM coverage area.
- The Alarm activates if movement persists. The alarm sounds for 20 seconds, very loud! Should any thief be stupid enough to continue, they will soon find themselves the centre of attention. To comply with local councils noise pollution legislation, the M2 shuts down after 3 successive alarms, unless re-activated by the ignition key or SMS command.
- The Ignitor M2 will call your mobile should any alarm event occur, the rest is up to you.
- To Silence, simply switch ignition on. Tranquility and peace of mind return.
Download Ignitor M2 Installation and User Manual
TESTIMONIALS:
Just wanted to say thanks for the new alarm and great service. It fitted directly to my Duc, no problem. Great to have the flexibility to change the bike settings using my mobile.
Jim Duncan QLD
I've just finished installing my M2 to my XVS650. Physical installation took me only 10 minutes. It then took another 20-30 playing around with my phone settings. I can set up the M2 exactly how sensitive I wish (I like it sensitive), thanks again.
Arthur NSW
|
PRODUCTS
