'A Motorcycle Alarm designed to reduce install costs'

Only 2 wires to connect!

'Arms and disarms with the ignition key!'

Patented Design

No Key Fobs _ No Flat Batteries _ No Worries!

How it works

With the ignition key ON, the Ignitor® Motorcycle Alarm is always DISARMED.

With the ignition key OFF, the Ignitor® may be ARMED or DISARMED;

Action                  Key Position             Alarm Status

To Arm ... Simply switch the ignition off.

A 30 second snub period allows time for rider to dismount.

To Disarm ... Simply switch the ignition off twice.

A short chirp acknowledges the disarmed state.

Warning Chirps ... Sound if movement is detected.

Minimizes accidental alarms caused by pets or local fauna.

The Alarm ... Sounds if movement persists.

Sounds for 30 seconds - very loud!

To Silence ... Simply switch the ignition on.

Tranquillity and peace of mind return.

Additional Feature ...

The Ignitor® Motorbike Alarm shuts down after 3 successive alarms.

By then it's clear; Nobody cares your bike is being stolen.

The Ignitor's Patented '2-wire Interface'

The Ignitor® Motorbike alarm connects to your motorcycle using only 2 wires.

The Ignitor's positive wire connects to battery(+).

The Ignitor's trace wire connects to a 'suitable lamp circuit',

which is simply the positive wire of a tail lamp, rego plate lamp, headlamp etc.

Refer to the Installation and User Manual for further detail.

To better understand how the Ignitor® Motorbike Alarm sources it's power,

Click on the diagram below:

There are several advantages of the Ignitor's innovative '2-wire Interface';

Firstly, it is impossible for the alarm to be set off whilst the ignition key is ON

(An important safety feature often overlooked by other manufacturers).

Secondly, the Ignitor® Motorcycle Alarm does not require 'key fobs' to arm or disarm.

No replacing batteries or sourcing spare parts after your first thunderstorm.

Last but most importantly, there are less wires to connect.

The Ignitor® Motorbike Alarm respects you wiring harness with a 'low impact install',

saving $$$ on installation costs.

Copyright © 2008 Ignitor Alarms - All Rights Reserved